The Latest In Carbide Endmill Designs In A Extensive And Prosperous Line From Iscar

Manufacturers and die & mold shops can eliminate chatter problems in numerous milling operations with Iscar's brand new Chatterfree carbide endmill. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the chief source of chatter. This empowers faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling. In addition, end users also report longer edge life due to reduced chatter. The chatter-free feature is offered in both solid carbide endmills and tips in Iscar's MULTI-MASTER replaceable-tip line. Diameter range is 6 to 20mm for the solid carbide endmills, and 8 to 20mm for MULTI-MASTER tips. These brand new endmills are ideal for low power machines with ISO40 or BT40 adaptations. The solid carbide version can manage full slot machining up to 2xD. Depth capability on the replaceable-tip construction is more bounded since the active length is shorter. In full slotting applications on alloy steel, the solid carbide construction easily handles 0.03-0.05 feed rates at 180-220mm/min surface speed and 2xD depth of cut.

FINISHRED - Revolutionary Solid Carbide Endmills

Iscar is introducing the EFR.. B44 and the MM EFS.. Finishred a revolutionary solid carbide endmill family. The Finishred carbide endmill is a combination of both roughing and finishing endmills in a single tool. Roughing endmills remove material from work pieces more rapidly and effectively than typical endmills. However, roughing endmills leave grooves on the machined surface. Consequently, after using a roughing endmill, a finishing endmill needs to be used in order to obtain a smooth surface finish. This means time-consuming tool change, setup time and necessity of maintaining two endmill types in the stock.

Features of the Finishred Endmills:

The EFR.. B44 and the MM EFS.. endmills feature 4 flutes with 45 degree helix, two serrated flutes and 2 continuous flutes.

The cutting edges of the finishing flutes are radially further from the tool axis than the cutting edges of the serrated flutes. The finishing flutes remove the grooves caused by the roughing flutes, leaving a fine surface finish.

The tool is fully effective and enables running at rough machining parameters, resulting in finish surface quality.

The distinctive tool design reduces vibration at high load applications.

The tool produces short and long chips simultaneously. This chip mixture is evacuated more efficiently than each individual chip type, an fantastic solution in slotting and cavity milling applications.

The Finishred is also available with the Multi-Master indexable milling head option which incorporates the Finishred features with the advantage of little setup time, no regrinding costs and the extended range of shank and extension options are available for the Multi-Master milling heads.

A single tool replaces the roughing and finishing endmills; therefore condensing stock.

Tool change and setup time can be discarded.

An extra tool position is gained on the machine

New Chip Splitting Solid Carbide Endmills for High Metal Removal Rates

ISCAR is announcing the ECP-3/4L family of chip splitting endmills. The new endmills are accessible with three and four 38 degree flutes in grade IC900. They feature 2xD and long shanks with decreased neck diameter, which allow machining along high shoulders, at high feeds. These endmills, due to their chip splitting attribute and force distribution can be used very comfortably on low power machines (CAT40/BT40/ISO40). The serrated cutting edge incorporates flat peaks which leave a better surface finish, in comparison to the current rougher carbide endmill. The ECP endmills are advocated for machining austenitic and martensitic stainless steel, at up to 2xD depth of cut. They can be used on alloyed steel as well. All of the preliminary tests conducted at various customers' locations showed fantastic results.

A Number Of Improvements Have Broadened Iscar's Families Of Indexable Endmills For Expanded Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.

Iscar Recently Releases Numerous Original Lines To Extend Their Family Of Milling Tools
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

Iscar Adds Their Latest Innovations To A Long Line Of Effective Hole Making Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.

New Cutters And Carbide Insert Arrangements From Iscar To Better Maximize The Machining Procedure
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.

Push Pull Testing For Construction Industry Supplying Calibrated Gauges. Stress Load Testing Procedures For On Site Evidence To Testing Standards.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Commercial Water Heater - Considering All Of Your Needs - Study With Care To Know More
Looking into a commercial water heater? Then you have a few things that you must consider. Take a look at these areas to avoid making a mistake with the wrong unit.